Custom Stainless Steel Decorative Profiles
Custom-made architectural and decorative stainless steel profiles in standard and irregular shapes.
Project Case – Hotel Project
U-Shaped Stainless Steel Skirting Installation
With extensive experience in custom architectural and decorative metal fabrication, we provide long-term support for interior contractors, construction companies, real estate developers, and design firms.
We undertake custom stainless steel trim and profile projects for a wide range of applications, including residential interiors, hotel fit-outs, shopping mall renovations, office fit-outs, facade decoration, and other architectural projects.
From custom dimensions and profile shapes to surface finishes and colors, stainless steel profiles can be fabricated according to project drawings and specific installation requirements.
The following is a hotel project in China featuring 80 mm high U-shaped stainless steel skirting with a hairline black finish.
Simple Installation Guide for U-Shaped Stainless Steel Skirting
1. Prepare the Wall Surface
Remove dust, loose cement, and debris from the base of the wall. Fill and level any uneven areas. An uneven surface may cause the skirting to lift or leave visible gaps.
2. Measure and Cut
Measure the actual length of each wall and cut the stainless steel skirting to size using a suitable metal cutting machine. For internal corners, use 45° mitre cuts. External corners can be finished with 45° mitre joints or matching corner accessories.
3. Install the Base Clips
Secure the matching plastic clips or metal base along the bottom of the wall using screws and wall plugs. Space the clips approximately 40–50 cm apart, and install additional clips near corners for better stability.
4. Snap the Stainless Steel Cover into Place
Align the U-shaped stainless steel skirting cover with the installed base or clips, then press firmly until it snaps securely into position. Make sure the panel is firmly locked and does not move.
5. Finish the Edges and Joints
Apply a small amount of sealant to joints and internal/external corners where necessary. This helps conceal minor gaps and provides a clean, professional finish.